Umnxeba othe ngqo weVidiyo yeVenkile yeYunithi yangaphandle iModeli yeJSL23
Umnxeba othe ngqo weVidiyo yeVenkile yeYunithi yangaphandle iModeli yeJSL23
• Iphaneli yealluminiyam
• Isakhiwo sokufakela i-tamper-screws esipheleleyo, ukufakwa lula
• Indawo yokujonga ikhamera elungisekayo
• Umnyango omnye-isikhululo sinokuqhagamshelwa kwiifowuni zangaphakathi ezingama-32
• Ikhibhodi yesitishi somnyango inomsebenzi wokubonisa ukukhanya.
• Ilensi yekhamera ine-infrared diode enokusetyenziswa ebusuku.
• Ilungele izakhiwo ezinemigangatho emininzi (2×3, 2×6, okanye 2×7).
1.Isithethi: Xa undwendwe lufowuna, ilizwi eliphuma kwisikhululo segumbi liphuma kwisithethi.
2.C-Mic: Ukunxibelelana neRoom-station.
3.Iqhosha lokufowuna: Ngokucofa iqhosha, indlu enxulumene nayo iya kubizwa.
4.Ilensi yekhamera: Ukubonelela ngomfanekiso ocacileyo wembonakalo yangaphandle.
I-5.I-LED ye-infrared: Ii-LED ezakhelwe ngaphakathi zikuvumela ukuba uchonge iindwendwe kwiindawo ezikhanyiswe kakubi.
• Iphaneli yealluminiyam, iDrawbench kunye neAbrasive blasting craft
• ICCD enesoso esiphezulu
• Ucango lunokukhutshwa ngeendlela ezahlukeneyo ezifana nefowuni yangaphakathi, iyunithi yokulinda, ikhadi lesazisi, igama eliyimfihlo, iFingerprint Reader; Xhasa ikhadi le-ID le-8000
• Umsebenzi wokufowuna, ukuthetha-ngemva kwevidiyo, ukuvula njalo njalo.
• Ukubeka iliso kwisikhululo somnyango kwiyunithi ekhoyo ngaphakathi
• Abasebenzisi banokwenza inombolo yegumbi labo, ukuba bhetyebhetye kunye nokutshintsheka.
• Ingaqhubi , ingangenwa ngamanzi kwaye ingangenwa luthuli
| Umbane womsebenzi: | DC16.5V~20V |
| Amandla asetyenzisiweyo: | imeko engatshintshiyo: <30mA umsebenzi:<300mA |
| Uluhlu lwemeko yokusebenza | -30°c ~ +50°c |
| Ilensi yekhamera: | 1/3" CCD |
| Ilensi: | 92 iqondo ububanzi-engile |
| Isisombululo esithe tye: | 400 CCIR Line |
| Ubuncinci be-lamination intensity: | 0.3 Lux |
| I-infrared diode: | Ifakiwe |
| Ividiyo- ngaphandle: | 1 Vp-p 75 ohm |
| Izinto zesakhelo: | Aluminiyam ingxubevange |
| Uluhlu lwemeko yokusebenza | 45%-95% |
